Jump to content

User talk:Justin545

Page contents not supported in other languages.
From Wikipedia, the free encyclopedia


This user is very busy in real life and may not respond swiftly to queries.

Welcome!

Hello, Justin545, and welcome to Wikipedia! Thank you for your contributions. I hope you like the place and decide to stay. Here are some pages that you might find helpful:

I hope you enjoy editing here and being a Wikipedian! Please sign your messages on discussion pages using four tildes (~~~~); this will automatically insert your username and the date. If you need help, check out Wikipedia:Questions, ask me on my talk page, or ask your question and then place {{helpme}} before the question on your talk page. Again, welcome! Have fun editing Wikipedia !! ReluctantPhilosopher (talk) 17:13, 16 February 2008 (UTC)[reply]

Question about template "helpme"

[edit]

{{helpme}} What type of questions can I ask when I use {{helpme}}? I have some questions about quantum mechanics to discuss but I am not sure if it is suitable to use {{helpme}}...

Justin545 (talk) 23:54, 22 February 2008 (UTC)[reply]

To answer your question, {{helpme}} should only be used for questions such as using wikipedia. For content questions like physics you should go to Wikipedia:Reference desk. Hope this helps, if you have any questions feel free to ask me on my talkpage.--Sunny910910 (talk|Contributions|Guest) 23:57, 22 February 2008 (UTC)[reply]
Well, thanks! Wikipedia:Reference desk looks like a good place for me to discuss the questions! - Justin545 (talk) 00:06, 23 February 2008 (UTC)[reply]

Response in quantum computing thread

[edit]

I just wanted to mention that I finally posted a reply in the quantum computing thread. It might not show up in your watchlist because the thread is now in the archives at Wikipedia:Reference_desk/Archives/Science/2008_February_23. -- BenRG (talk) 16:25, 27 February 2008 (UTC)[reply]

Thank you for the mention and reply. I will take some time to understand it and give some response with repsect to your reply :) - Justin545 (talk) 01:07, 29 February 2008 (UTC)[reply]
Thanks for the barnstar. :-) Although I don't think I understand quantum mechanics all that well... -- BenRG (talk) 14:36, 14 March 2008 (UTC)[reply]

0.999999.... and 1

[edit]

Having seen you post several times in the mathematics section recently, I decided to take a look at your user page and was surprised to learn that you believe 0.99999.... doesn't equal 1. Considering that your a skeptic, I'm not terribly surprised by that, and it is good to question things, even generally excepted ideas. So to justify why 0.999...=1 one needs to thoroughly understand the ... notation's definition. The ellipsis notation (...) is used to indicate that a pattern in the digits of a decimal notation is repeated without end (infinite). so 0.9999... mean that the pattern of 9's in decimal places of successively decreasing value is repeated without end. Given the definition of ... it is easy to show either through limits or a converging summation, that 0.999...=1. There are also ways of showing it without using "higher" mathematics but those ways aren't always so convincing, it is certainly not the most intuitive result in mathematics. (One thing I must point out about the ... notation is that when it is used on a finite decimal that does not contain two or more repetitions of a pattern, it indicates that the decimal is infinite in length and does not imply that there is or is not a pattern) A math-wiki (talk) 23:29, 20 March 2008 (UTC)[reply]

Let
Then
But, according to your opinion
which is seems pretty odd to me. - Justin545 (talk) 12:37, 21 March 2008 (UTC)[reply]
Two errors here. First, you can't (in general) evaluate limits by plugging in the limiting value, otherwise there'd be no need for the concept of a limit. And that is what you've done here, since one of your stated assumptions was that 0.999999... = 1. Second, 0/0 is not infinite but rather indeterminate; it's the solution of 0x = 0, which is satisfied by every x. In contrast, 0x = 1 is not satisfied for any (finite) x, so 1/0 has no (finite) value instead of having all values. Getting 1/0 at the end of a calculation often means that there's no solution, but getting 0/0 just means that you can't find the solutions, if any, by that approach. -- BenRG (talk) 14:47, 21 March 2008 (UTC)[reply]
>> "Second, 0/0 is not infinite but rather indeterminate"
Apologies. I was making the response in a hurry. It should be corrected as
>> "since one of your stated assumptions was that 0.999999... = 1"
My opinion is and A math-wiki's opinion is . I was trying to show that .
>> "you can't (in general) evaluate limits by plugging in the limiting value, otherwise there'd be no need for the concept of a limit."
I'm not sure I understand that. I think it should be able to plug in the limiting value to evaluate limits since it's the basic concept of limits. Suppose we want to evaluate where is some fixed constant, we should be able to plug in to
(1)
The more does approaches to zero, the more accurate limit value we will get. So plug into (1) will get a more accurate value than . Plug into (1) will get a more accurate value than ...and so on. And we will end up with an infinitely small value , plug that value into (1) will get the true value (with infinite accuracy) of . According to A math-wiki's opinion, however, he may also say and we will get by plug into (1). - Justin545 (talk) 00:01, 22 March 2008 (UTC)[reply]
First off, I want to mention that x=0.000...1 would technically imply an unknown finite number of zeros proceeding the 1, however I understand your meaning in this context. So let me write 0.000...1 as u mean it in a different form , (I assume u would agree that, 0=0.0=0.00 etc. From this limit is it quite clear that the limit is 0 since 1/k becomes arbtrarily small as k becomes arbitrarily large.
As for >> "you can't (in general) evaluate limits by plugging in the limiting value, otherwise there'd be no need for the concept of a limit." (above) to clarify on what makes a limit different than a straight forward computation is the limit poses the question what is the function's output approaching as it's input is approaching ___. Whereas removing the limit statement, your absolutely right that 0/0 would be the 'value' (though technically, one would say the function is undefined at __in the above equation but that's not what the limit is asking, it's asking what is it approach not what is the actual value. A really good way of showing this is on a rational function, say you have and you are asked what the limit as x approaches 1 is. The limit in this case is defined whereas the value of f(x) is not at x=1 . In this case, f(x) is said to have a removable discontinuity at x=1 since you could cancel the factor x=1 on both the numerator and the denominator to get . Finally, directly applying the limit in the definition of the derivative will also yield 0/0 not as you position would imply. , substitute, that's exactly what you got when you attempted to show that my assertion that 0.999...=1 was incorrect. One last thing, there does come a point for some f(x)'s where one can substitute the limit directly and is an example, this will yield , and the reason that is a valid substitution is because 1/ is a creative form of zero since 1 is arbirarily small compaired to infinity. thus A math-wiki (talk) 09:34, 22 March 2008 (UTC)[reply]
>> " The ellipsis notation (...) is used to indicate that a pattern in the digits of a decimal notation is repeated without end (infinite)...I want to mention that x=0.000...1 would technically imply an unknown finite number of zeros proceeding the 1"
Ur prior statement seems to contradict ur latter statement.
>> "say you have and you are asked what the limit as x approaches 1 is. The limit in this case is defined whereas the value of f(x) is not at x=1 ."
I think has also defined value at since
>> "In this case, f(x) is said to have a removable discontinuity at x=1 "
Excuse me...removable discontinuity?
>>you could cancel the factor x=1 on both the numerator and the denominator
Yep, because
>> "1/ is a creative form of zero since 1 is arbirarily small compaired to infinity"
Correct, is so small compaired to infinity so we can ignore the difference between 1/ and without changing the results for "some" cases. But we can not "always" ignore the difference between 1/ and for "all" cases, since the difference between 1/ and is significant for some cases. For example, we should NOT ignore the difference between 1/ and for the case , substitute the limit directly by 1/ and will yield two different results for the case, which means the difference between 1/ and is significant for the case. For another example, is NOT "always" equivalent to since substitute the limit directly by and will not always yield the same results for all of kind of 's and 's. is "said" to be equivalent to only when substitute the limit directly by and will yield the same results for some 's and 's. When is "said" to be equivalent to , it means the difference between and is trivial and therefore can be ignored for the case. - Justin545 (talk) 08:11, 23 March 2008 (UTC)[reply]
>> " The ellipsis notation (...) is used to indicate that a pattern in the digits of a decimal notation is repeated without end (infinite)...I want to mention that x=0.000...1 would technically imply an unknown finite number of zeros proceeding the 1" (...) with no symbols after it means that is infinite number of digits, if there is a number or several numbers afterwards then it is an unknown finite number of digits.
>> "say you have f(x)=\frac{x^2+6x+5}{x+1} and you are asked what the limit as x approaches 1 is. The limit in this case is defined whereas the value of f(x) is not at x=1 .", sorry that was a typo on my part, try x=-1 instead of x=1.
>> "In this case, f(x) is said to have a removable discontinuity at x=1 ", a removable discontinuity can be defined as follows, assume there exist two function f(x) and g(x) such that f(x)=g(x) if and only if , the functions in my previous argument were meant to demonstrate this concept.
regardless of circumstances assuming the standard definitions for those symbols. I suggest your read Limit of a function it will help you more clearly understand limits. A math-wiki (talk) 13:31, 23 March 2008 (UTC)[reply]
Take a look at this approach instead.
Take that as a definition of 0.999... and then evaluate that sum. A math-wiki (talk) 23:37, 21 March 2008 (UTC)[reply]
When is a continuous fuction, we can write
If
Then we can ensure
where means that
U can say is "symbolically" equivalent to . But I doubt is also "semantically" equivalent to since there are subtle differences. For example, if is also "semantically" equivalent to , we should be able to say that is "always" equivalent to . But actually can be said to be equivalent to only if the denominator is non-zero. That subtle difference makes me believe is not "semantically" equivalent to . - Justin545 (talk) 12:53, 22 March 2008 (UTC)[reply]
does not mean or any particular value, it is a specification on the limit, telling us where and if applicable in which direction we are to be evaluating the limit. Consider this limit exists if and only if for every real there exists a real such that implies . Note that the value of the limit does not depend on the value of , and a more general definition applies for functions defined on subsets of the real line. Let be an open interval in , and a point of . Let be a real-valued function defined on all of except possibly at . We then say that the limit of as approaches is if and only if, for every real there exists a real such that and implies . Note that the limit does not depend on being well-defined.
Firstly, there is no such thing as symbolically vs semantically equivalent, either something is equal to something else or not. 0.999....=1 can be verified very easily by the convergence of the sum I provided. As for you limit argument about g(x), that really has no bearing here, as the denominator is non-zero. If you have a sum which appears to be 0/0 your again dealing with an indeterminate form. And the expression should be rewritten to so that you answer will look different than 0/0 because 0/0 tells you f(x) has a discontinuity at x=k where f(k)=0/0. The best way to clarify what limits mean and how they work would be to look at the tangent line problem. Say we have a function f(x), and we want to know what the equation for a line that touches f(x) at x=3 is. We define the secant line, a line which cuts through and . Now the secant line intersects f(x) at and , but we want the tangent line not the secant line, the tangent line just touches f(x) at x=3 so it's intersection points are superimposed at (3,f(3)) and (3,f(3)), the slope of the secant line is . if we directly substituted the intersection point(s) (3,f(3)), and (3,f(3)), it's quite obvious that we would see 0/0 as the slope which is merely indeterminate, obviously m has some value if f is indeed a continuous function on an interval containing x=c (x=3 in our case) as is assumed in the Tangent line problem. Indeterminate tells us that direct substitution will not work. but we know that the answer must exist and it must be possible to find it. This is where the concept of limits was born, we use the secant line's slope to approximate the slope of the tangent line, then we apply a limit to increase the accuracy to arbitrarily high levels (e.g. perfect). The slope of the secant line is (this looks a lot like a derivative now doesn't it?) Now to get the exact slope of the tangent line one must invoke a limit. . (looks even more the definition of the derivative). the final step is to simplify the denominator and what you have is the derivative of f(x) at c for whichever c you choose, if you don't choose a c as I didn't then it gives f'(x).
And another really key point to make is that if and only if f(x) is continuous on an interval [a,b] that contains c. Otherwise f(x) may not be defined at x=c as is the case of the rational function I gave an example from in one my posts above. In general it is incorrect to assume A math-wiki (talk) 22:19, 22 March 2008 (UTC)[reply]
I also get the inpression that you do not fully understand limits and their definition, so reading up on Limit of a function may help clarify your understanding. A math-wiki (talk) 22:27, 22 March 2008 (UTC)[reply]
There is an article here on wikipedia, that specifically addresses why 0.999...=1, it is here 0.99999... A math-wiki (talk) 22:59, 23 March 2008 (UTC)[reply]
>> "Note that the value of the limit does not depend on the value of "
It just means has a removable discontinuity at as you said.
>> "Firstly, there is no such thing as symbolically vs semantically equivalent, either something is equal to something else or not."
Agree. But it's a matter of interpretation of the math language. Basically, math itself has no meaning at all. Math is just a set of inference rules. You can make any interpretation of the math as long as you don't break the rules and you can assure of the consistency. I was using some inappropriate words, such as symbolically vs semantically equivalent, to explain the concept. But I think my latter interpretation:
is so small compaired to infinity so we can ignore the difference between 1/ and without changing the results for "some" cases. But we can not "always" ignore the difference between 1/ and for "all" cases, since the difference between 1/ and is significant for some cases. For example, we should NOT ignore the difference between 1/ and for the case , substitute the limit directly by 1/ and will yield two different results for the case, which means the difference between 1/ and is significant for the case. For another example, is NOT "always" equivalent to since substitute the limit directly by and will not always yield the same results for all of kind of 's and 's. is "said" to be equivalent to only when substitute the limit directly by and will yield the same results for some 's and 's. When is "said" to be equivalent to , it means the difference between and is trivial and therefore can be ignored for the case.
should be able to satisfy the rules and definitions of limits. You can provide any counterexample to proof the interpretation is wrong if you disagree.
>> "0.999....=1 can be verified very easily by the convergence of the sum I provided."
Frankly, I'm not good at math as you are since I have no such perfect educational background as you have. I think the convergence of the sum is not so obvious to me. - Justin545 (talk) 09:04, 24 March 2008 (UTC)[reply]
>> "And the expression should be rewritten to so that you answer will look different than 0/0 because 0/0 tells you f(x) has a discontinuity at x=k where f(k)=0/0."
Consider a function then we can conclude that . As you said we can cancel the the value on both the numerator and the denominator, which implies which implies . Think again, we conclude that —– an indeterminate form! Does that mean or ? If , how come we could get two different results and ? How to solve this problem? - Justin545 (talk) 09:30, 24 March 2008 (UTC)[reply]
In that case 0/0=1, but consider the function then you could conclude through the same argument you used that , the point I'm making is, that 0/0 doesn't tell you what the value is, so it is indeterminate. Technically, making the substitution would imply as a condition, for the very reason that you would obtain 0/0, which, because of it's indeterminate nature, would result in the answer not being well-defined for . 0/0 is considered to be undefined, don't confuse undefined with infinite, they are not the same thing! so technically, the latter form of h(x), which I shall call H(x) is undefined for H(0), but h(0)=1, so with the exception of x=0, H(x)=h(x). You have introduced a removable discontinuity at x=0, by the substitution you used. The limits as x approaches 0 of both h and H exist and are equal, because both h, and H meet the definition a Limit of a function when p=0. A math-wiki (talk) 23:29, 24 March 2008 (UTC)[reply]

And for a simply proof that 0.999...=1,

, I assume you agree that this is a true mathematical statement, then

If 0.333... is interpreted as base 10 would imply, then it's equivalent to

A math-wiki (talk) 23:47, 24 March 2008 (UTC)[reply]

>> "making the substitution would imply as a condition"
According to your response, you were saying ? Isn't it? Therefore, is not equal to except we write
,
correct? Thus, we can not simply cancel the the values on both the numerator and the denominator but rather we should also add behind the cancelling, right?
>> therefore
Accept. That is the proof from the article 0.99999.... But recall what you said
"I decided to take a look at your user page and was surprised to learn that you believe 0.99999.... doesn't equal 1. Considering that your a skeptic, I'm not terribly surprised by that, and it is good to question things, even generally excepted ideas."
I think questioning and skepticize are basic attitude to handle scientific problems. A statement can't be said to be true until we can proof it. That is what I did when I put
!=This user believes that 0.99999... does NOT equal 1.
on my user page since I didn't see the proof of 0.99999....=1 before so I doubt their equivalence. There is no need to surprise. If you carefully read the user box "This user believes that 0.99999... does NOT equal 1." you will realize the box is just telling my faith but not the fact that 0.99999... does NOT equal 1. And there are some students have the same faith as me since there is a section from the article 0.99999... :
Students of mathematics often reject the equality of 0.999… and 1, for reasons ranging from their disparate appearance to deep misgivings over the limit concept and disagreements over the nature of infinitesimals. There are many common contributing factors to the confusion:
  • Students are often "mentally committed to the notion that a number can be represented in one and only one way by a decimal." Seeing two manifestly different decimals representing the same number appears to be a paradox, which is amplified by the appearance of the seemingly well-understood number 1.[1]
  • Some students interpret "0.999…" (or similar notation) as a large but finite string of 9s, possibly with a variable, unspecified length. If they accept an infinite string of nines, they may still expect a last 9 "at infinity".[2]
  • Intuition and ambiguous teaching lead students to think of the limit of a sequence as a kind of infinite process rather than a fixed value, since a sequence need not reach its limit. Where students accept the difference between a sequence of numbers and its limit, they might read "0.999…" as meaning the sequence rather than its limit.[3]
  • Some students regard 0.999… as having a fixed value which is less than 1 by an infinitely small amount.
  • Some students believe that the value of a convergent series is an approximation, not the actual value.
which means it's not so odd to believe 0.99999....=1 and the fact of 0.99999....=1 is not a common sense for all students! - Justin545 (talk) 03:56, 25 March 2008 (UTC)[reply]

, if and only if, so if we have , then is defined on but if we consider that is defined for that includes p=0!! The limit to exists at p=0 because f is defined for all x in an interval (a,b), except at p=0 which is admissible under the definition of the Limit of a function. So the limit exists, despite f not being well-defined for x=0. This limit is evaluated as follows, , direct substitution yields 0/0, so instead we define another function which is equal to f(x) on (a,b) except at x=0, and is continuous on [a,b], g(x)=1, since then the limit may be evaluated by direct substitution since g is defined at x=0, the reason this works conceptually, is since g is continuous, then we know that it will answer the question what is f approaching as x approaches 0 (in both directions). And using graphical reasoning, the graph of f is a line with m=0, that that passes through (1,1)

It should be noted that for most practical purposes (especially applications, canceling without keeping the conditions that prevent the original denominator from becoming zero) is really not necessary. Where it can become an issue is in things like the formal proof of the chain rule, and other such formal proofs, where absolutely every detail must be included to ensure accuracy and correctness of theoretical results.

It should also be noted that the proof of 0.999...=1 has no variables, and all of the quantities involved are non-zero, so it is perfectly ok, even under fully formal conditions to cancel with any conditions, since there are no variables to worry about. So the proof above in without error in that regard.

I was surprised that you believed due to the fact that your posts had shown considerable confidence with at least Calculus level mathematics, so I presumed that you would have justified why 0.999...=1 for yourself already. You're absolutely right that you should approach science and especially mathematics in the mind set of a skeptic. I too questioned that result when it was first presented to me, but after completing a proof like one I provided with fractions, I was convinced of the validity of that claim. I was even more skeptical of the chain rule when it was first presented to me, but I eventually studied the proof in my text with sufficient thoroughness to assure myself of it's validity. I decided to start this post since from what I knew of your mindset, I suspected that you would be able to remain rational thorough the discussion, and you have much to my delite and appreciation. A math-wiki (talk) 10:11, 25 March 2008 (UTC)[reply]

References

  1. ^ Bunch p.119; Tall and Schwarzenberger p.6. The last suggestion is due to Burrell (p.28): "Perhaps the most reassuring of all numbers is 1.…So it is particularly unsettling when someone tries to pass off 0.9~ as 1."
  2. ^ Tall and Schwarzenberger pp.6–7; Tall 2000 p.221
  3. ^ Tall and Schwarzenberger p.6; Tall 2000 p.221

Go ahead

[edit]

Add or remove whitespace as you wish. siℓℓy rabbit (talk) 13:38, 5 February 2009 (UTC)[reply]

Equation numbering barnstar

[edit]
The Working Wikipedian's Barnstar
Thanks for the nice numbering of equations in BKL singularity. This helped a lot. Lantonov (talk) 15:19, 18 February 2009 (UTC)[reply]

Template:AngleBracket has been nominated for deletion. You are invited to comment on the discussion at the template's entry on the Templates for discussion page. Thank you. Plastikspork ―Œ(talk) 17:43, 6 November 2009 (UTC)[reply]

If this is the first article that you have created, you may want to read the guide to writing your first article.

You may want to consider using the Article Wizard to help you create articles.

Thank you for experimenting with Wikipedia. Your test worked, and the page that you created has been or soon will be deleted. Please use the sandbox for any other tests you want to do. Take a look at the welcome page if you would like to learn more about contributing to our encyclopedia.

If you think that this notice was placed here in error, you may contest the deletion by adding {{hang on}} to the top of the page that has been nominated for deletion (just below the existing speedy deletion, or "db", tag; if no such tag exists, then the page is no longer a speedy delete candidate and adding a hang-on tag is unnecessary), coupled with adding a note on the talk page explaining your position, but be aware that once tagged for speedy deletion, if the page meets the criterion, it may be deleted without delay. Please do not remove the speedy deletion tag yourself, but don't hesitate to add information to the page that would render it more in conformance with Wikipedia's policies and guidelines. If the page is deleted, you can contact one of these administrators to request that the administrator userfy the page or email a copy to you. Mhiji 22:43, 9 January 2011 (UTC)[reply]

The article MicroXwin has been proposed for deletion because of the following concern:

No evidence of third-party notability, reads like a press release

While all constructive contributions to Wikipedia are appreciated, content or articles may be deleted for any of several reasons.

You may prevent the proposed deletion by removing the {{proposed deletion/dated}} notice, but please explain why in your edit summary or on the article's talk page.

Please consider improving the article to address the issues raised. Removing {{proposed deletion/dated}} will stop the proposed deletion process, but other deletion processes exist. In particular, the speedy deletion process can result in deletion without discussion, and articles for deletion allows discussion to reach consensus for deletion. David Gerard (talk) 14:00, 3 October 2013 (UTC)[reply]

RfC: New helper policy

[edit]

Hello member of Category:Wikipedians who use IRC! You are invited to join an ongoing discussion on Wikipedia talk:IRC/wikipedia-en-help aimed at defining a policy for prerequisites to being a helper in the "#wikipedia-en-help connect" channel in a section titled "New helper policy".

To prevent future mailings about IRC, you may remove your user page from Category:Wikipedians who use IRC.
Assistance is available upon request if you can't figure out where it is being added to your user page.
This message has been sent by MediaWiki message delivery (talk) 10:59, 27 April 2015 (UTC) on behalf of — {{U|Technical 13}} (etc)
[reply]

Proposed deletion of Guievict

[edit]

The article Guievict has been proposed for deletion because of the following concern:

software article of unclear notability, lacking independent references, tagged for notability and refs since 2011

While all constructive contributions to Wikipedia are appreciated, content or articles may be deleted for any of several reasons.

You may prevent the proposed deletion by removing the {{proposed deletion/dated}} notice, but please explain why in your edit summary or on the article's talk page.

Please consider improving the article to address the issues raised. Removing {{proposed deletion/dated}} will stop the proposed deletion process, but other deletion processes exist. In particular, the speedy deletion process can result in deletion without discussion, and articles for deletion allows discussion to reach consensus for deletion. Dialectric (talk) 14:43, 1 May 2015 (UTC)[reply]

"it's an error of table can't be displayed".

[edit]

"Could" is not an adjective, it's a Past form. "Can", and "cant", have no adjective. However, "can" = "is able to", and "can't" = "is unable to", while "is unable" - has an adjective: "unable", so you can say: "it is an error of table unable to be displayed".

Losing fat without aerobic exercise or eating excess protein

[edit]

Just losing weight overall could help, by eating fewer total calories. Of course, you need to get enough protein (I think 55 g per day is the general recommendation, but can go lower if your doctor requires it), but no excess. Beans, fish (not fried !), and nuts (not salted !) are a good choice for protein sources. Vegetables provide lots of nutrients but few calories, so they are a good choice. Keep the carbs low, such as grains, potatoes, and sugar. Also avoid artificial sweeteners. Surprisingly, eating fats don't seem to make you gain fat, but limit saturated fats and avoid artificial trans fats entirely.

You left open the possibility or anaerobic exercise. If so, any exercise can help, even just walking a bit each day. StuRat (talk) 14:21, 9 July 2015 (UTC)[reply]


see discussion at WP:AN

[edit]

From your method of editing and the subject material that interests you I suspect you may be a sock of User Sagittarian Milky Way. See the discussion here. My apology for the delay in notification. μηδείς (talk) 21:16, 21 September 2015 (UTC)[reply]

You seem to have misunderstood the above comment. Given problematic editting we had from the above editor, Sagittarian Milky Way, I brought to light your edit which seemed to indicate you might actually be the same person due to the similarity in topic. Assuming you are not the same person as the other editor, there is nothing to be concerned with, and your edits are fine. Since you were mentioned, it was necessary to notify you, and it implies no guilt or wrongdoing on your part whatsoever. I am sorry for the confusion. μηδείς (talk) 18:34, 26 September 2015 (UTC)[reply]

Help me!

[edit]

I have made a long edit on WP:sandbox before (look here). I would like to know if such kind of edit is inappropriate. And did I violate any guidelines of editing sandbox?

Justin545 (talk) 01:59, 26 September 2015 (UTC)[reply]

Such an edit is not inappropriate. The Sandbox is for testing. As long as you aren't putting libelous content, personal attacks, spam, or things of that nature there, you should be fine. Cheers, Nick⁠—⁠Contact/Contribs 02:17, 26 September 2015 (UTC)[reply]
There's nothing against doing that, but It's cleared up every so often automatically. I recommend using/creating your own sandbox (click here) if you don't want it to be removed. --  Kethrus |talk to me  02:19, 26 September 2015 (UTC)[reply]

A tag has been placed on User:Justin545/Blog comments requesting that it be speedily deleted from Wikipedia. This has been done under section U5 of the criteria for speedy deletion, because the page appears to consist of writings, information, discussions, and/or activities not closely related to Wikipedia's goals. Please note that Wikipedia is not a free Web hosting service. Under the criteria for speedy deletion, such pages may be deleted at any time.

If you think this page should not be deleted for this reason, you may contest the nomination by visiting the page and clicking the button labelled "Contest this speedy deletion". This will give you the opportunity to explain why you believe the page should not be deleted. However, be aware that once a page is tagged for speedy deletion, it may be removed without delay. Please do not remove the speedy deletion tag from the page yourself, but do not hesitate to add information in line with Wikipedia's policies and guidelines. If the page is deleted, and you wish to retrieve the deleted material for future reference or improvement, then please contact the deleting administrator, or if you have already done so, you can place a request here. Mys_721tx (talk) 09:20, 3 November 2015 (UTC)[reply]

Hi,
You appear to be eligible to vote in the current Arbitration Committee election. The Arbitration Committee is the panel of editors responsible for conducting the Wikipedia arbitration process. It has the authority to enact binding solutions for disputes between editors, primarily related to serious behavioural issues that the community has been unable to resolve. This includes the ability to impose site bans, topic bans, editing restrictions, and other measures needed to maintain our editing environment. The arbitration policy describes the Committee's roles and responsibilities in greater detail. If you wish to participate, you are welcome to review the candidates' statements and submit your choices on the voting page. For the Election committee, MediaWiki message delivery (talk) 13:35, 24 November 2015 (UTC)[reply]

ArbCom 2017 election voter message

[edit]

Hello, Justin545. Voting in the 2017 Arbitration Committee elections is now open until 23.59 on Sunday, 10 December. All users who registered an account before Saturday, 28 October 2017, made at least 150 mainspace edits before Wednesday, 1 November 2017 and are not currently blocked are eligible to vote. Users with alternate accounts may only vote once.

The Arbitration Committee is the panel of editors responsible for conducting the Wikipedia arbitration process. It has the authority to impose binding solutions to disputes between editors, primarily for serious conduct disputes the community has been unable to resolve. This includes the authority to impose site bans, topic bans, editing restrictions, and other measures needed to maintain our editing environment. The arbitration policy describes the Committee's roles and responsibilities in greater detail.

If you wish to participate in the 2017 election, please review the candidates and submit your choices on the voting page. MediaWiki message delivery (talk) 18:42, 3 December 2017 (UTC)[reply]

ArbCom 2018 election voter message

[edit]

Hello, Justin545. Voting in the 2018 Arbitration Committee elections is now open until 23.59 on Sunday, 3 December. All users who registered an account before Sunday, 28 October 2018, made at least 150 mainspace edits before Thursday, 1 November 2018 and are not currently blocked are eligible to vote. Users with alternate accounts may only vote once.

The Arbitration Committee is the panel of editors responsible for conducting the Wikipedia arbitration process. It has the authority to impose binding solutions to disputes between editors, primarily for serious conduct disputes the community has been unable to resolve. This includes the authority to impose site bans, topic bans, editing restrictions, and other measures needed to maintain our editing environment. The arbitration policy describes the Committee's roles and responsibilities in greater detail.

If you wish to participate in the 2018 election, please review the candidates and submit your choices on the voting page. MediaWiki message delivery (talk) 18:42, 19 November 2018 (UTC)[reply]

ArbCom 2019 election voter message

[edit]
Hello! Voting in the 2019 Arbitration Committee elections is now open until 23:59 on Monday, 2 December 2019. All eligible users are allowed to vote. Users with alternate accounts may only vote once.

The Arbitration Committee is the panel of editors responsible for conducting the Wikipedia arbitration process. It has the authority to impose binding solutions to disputes between editors, primarily for serious conduct disputes the community has been unable to resolve. This includes the authority to impose site bans, topic bans, editing restrictions, and other measures needed to maintain our editing environment. The arbitration policy describes the Committee's roles and responsibilities in greater detail.

If you wish to participate in the 2019 election, please review the candidates and submit your choices on the voting page. If you no longer wish to receive these messages, you may add {{NoACEMM}} to your user talk page. MediaWiki message delivery (talk) 00:10, 19 November 2019 (UTC)[reply]

ArbCom 2020 Elections voter message

[edit]
Hello! Voting in the 2020 Arbitration Committee elections is now open until 23:59 (UTC) on Monday, 7 December 2020. All eligible users are allowed to vote. Users with alternate accounts may only vote once.

The Arbitration Committee is the panel of editors responsible for conducting the Wikipedia arbitration process. It has the authority to impose binding solutions to disputes between editors, primarily for serious conduct disputes the community has been unable to resolve. This includes the authority to impose site bans, topic bans, editing restrictions, and other measures needed to maintain our editing environment. The arbitration policy describes the Committee's roles and responsibilities in greater detail.

If you wish to participate in the 2020 election, please review the candidates and submit your choices on the voting page. If you no longer wish to receive these messages, you may add {{NoACEMM}} to your user talk page. MediaWiki message delivery (talk) 01:43, 24 November 2020 (UTC)[reply]

ArbCom 2021 Elections voter message

[edit]
Hello! Voting in the 2021 Arbitration Committee elections is now open until 23:59 (UTC) on Monday, 6 December 2021. All eligible users are allowed to vote. Users with alternate accounts may only vote once.

The Arbitration Committee is the panel of editors responsible for conducting the Wikipedia arbitration process. It has the authority to impose binding solutions to disputes between editors, primarily for serious conduct disputes the community has been unable to resolve. This includes the authority to impose site bans, topic bans, editing restrictions, and other measures needed to maintain our editing environment. The arbitration policy describes the Committee's roles and responsibilities in greater detail.

If you wish to participate in the 2021 election, please review the candidates and submit your choices on the voting page. If you no longer wish to receive these messages, you may add {{NoACEMM}} to your user talk page. MediaWiki message delivery (talk) 00:24, 23 November 2021 (UTC)[reply]

ArbCom 2022 Elections voter message

[edit]

Hello! Voting in the 2022 Arbitration Committee elections is now open until 23:59 (UTC) on Monday, 12 December 2022. All eligible users are allowed to vote. Users with alternate accounts may only vote once.

The Arbitration Committee is the panel of editors responsible for conducting the Wikipedia arbitration process. It has the authority to impose binding solutions to disputes between editors, primarily for serious conduct disputes the community has been unable to resolve. This includes the authority to impose site bans, topic bans, editing restrictions, and other measures needed to maintain our editing environment. The arbitration policy describes the Committee's roles and responsibilities in greater detail.

If you wish to participate in the 2022 election, please review the candidates and submit your choices on the voting page. If you no longer wish to receive these messages, you may add {{NoACEMM}} to your user talk page. MediaWiki message delivery (talk) 00:42, 29 November 2022 (UTC)[reply]

ArbCom 2023 Elections voter message

[edit]

Hello! Voting in the 2023 Arbitration Committee elections is now open until 23:59 (UTC) on Monday, 11 December 2023. All eligible users are allowed to vote. Users with alternate accounts may only vote once.

The Arbitration Committee is the panel of editors responsible for conducting the Wikipedia arbitration process. It has the authority to impose binding solutions to disputes between editors, primarily for serious conduct disputes the community has been unable to resolve. This includes the authority to impose site bans, topic bans, editing restrictions, and other measures needed to maintain our editing environment. The arbitration policy describes the Committee's roles and responsibilities in greater detail.

If you wish to participate in the 2023 election, please review the candidates and submit your choices on the voting page. If you no longer wish to receive these messages, you may add {{NoACEMM}} to your user talk page. MediaWiki message delivery (talk) 00:28, 28 November 2023 (UTC)[reply]

Template:Numbered block and Multiline table in list lint errors

[edit]

(Courtesy ping of Jonesey95, who is often helpful in fixing lint errors.) Justin545: You recently edited Template:Numbered block, and now there are several pages with Multiline table in list lint errors. I started in User space and fixed two pages, User:Justin545 and User:Mim.cis/sandbox/Derivation of Landmark LDDMM Conditions, before I discovered that changing {{NumBlk||...}} to {{NumBlk|:|...}} made the lint error go away, and only then did I discover that you had edited Template:Numbered block. So I am pausing now to inform you of this. Please see if you can fix Template:Numbered block to avoid the Multiline table in list lint error. —Anomalocaris (talk) 05:44, 2 May 2024 (UTC)[reply]

Thanks for letting me know. I don't understand why errors of multiline table in list occur. I have commented out all the line breaks in the source of NumBlk if I understand correctly. Probably I need to revert it and try to figure out the cause ... Justin545 (talk) 06:54, 2 May 2024 (UTC)[reply]
The change has been undone. -- Justin545 (talk) 07:25, 2 May 2024 (UTC)[reply]
If you want to put your proposed change in the sandbox and make some relevant test cases, I'll be happy to look at them. – Jonesey95 (talk) 17:08, 2 May 2024 (UTC)[reply]
Thank you for your time! Let me try to make some test cases and leave a message here when it's available. -- Justin545 (talk) 01:14, 3 May 2024 (UTC)[reply]
Hi Jonesey95, I have made a few test cases you might want to take a look ~ -- Justin545 (talk) 04:49, 3 May 2024 (UTC)[reply]