Jump to content

Piper oilfield

Coordinates: 58°17′N 0°07′E / 58.28°N 0.12°E / 58.28; 0.12
From Wikipedia, the free encyclopedia
Piper oilfield
North Sea Oil and Gas Fields
Piper oilfield is located in North Sea
Piper oilfield
Location of Piper oilfield
CountryScotland, United Kingdom
LocationNorth Sea
Offshore/onshoreOffshore
Coordinates58°17′N 0°07′E / 58.28°N 0.12°E / 58.28; 0.12
OperatorRepsol Resources UK
Field history
Discovery1973
Start of production1976
Production
Peak of production (oil)300,000 barrels per day (~1.5×10^7 t/a)

The Piper oilfield is a substantial North Sea oilfield covering 30.1 km2 (11½ sq. mi.). It lies roughly halfway between Aberdeen and Bergen, at the eastern end of the Moray Firth basin.[1] Oil extracted from it is piped to Scotland, where it is stabilised at an oil plant on the island of Flotta, in the Orkney archipelago, while gas is shipped via the Frigg gas pipeline.[1] In June 1975, the Piper Alpha oil platform was placed over the field in 144 metres (79 fathoms) of water, secured in place by 24 piles extending 116 metres (63 fathoms) beneath the seabed. The platform was designed for simultaneous drilling and production.[1] Piper Alpha was the site of the world's deadliest oil platform disaster when it was destroyed by an explosion in 1988, with the loss of 167 lives. Piper Bravo was installed in 1992.[2] Talisman Energy acquired a controlling interest in 2000.[3]

Occidental Petroleum Corp., Getty Oil (Britain) Ltd., Thomson North Sea Ltd., and Allied Chemical (North Sea) Ltd.,[1] that later transformed into the OPCAL joint venture, obtained an oil exploration licence in 1972 and discovered the Piper oilfield in early 1973 after seismically mapping the area.[1] Oil production started in 1976 with about 250,000 barrels per day (40,000 m3/d) increasing to 300,000 barrels per day (48,000 m3/d). A gas recovery module was installed by 1980. Production declined to 125,000 barrels per day (19,900 m3/d) by 1988. OPCAL built the Flotta oil terminal in the Orkney Islands to receive and process oil from the Piper, Claymore and Tartan fields, each with its own platform. A 30-inch (760 mm) diameter main oil pipeline ran 128 miles (206 km) from Piper Alpha to Flotta, with a short oil pipeline from the Claymore platform joining it some 20 miles (32 km) to the west. The Tartan field also fed oil to Claymore and then onto the main line to Flotta.[4] Separate 46 cm (18") diameter gas pipelines run from Piper to the Tartan platform, and from Piper to the gas compressing platform MCP-01 some 30 miles (48 km) to the northwest.

Geology

[edit]

The field consists of three folded, tilted blocks on the northern edge of the Witch Ground Graben.[1] Production is from the Upper Jurassic Piper Sandstone, a sandstone shelf with a thickness up to 142 metres (465') and Oil-water contact ranging in depths from 2195 to 2804 metres (7201' to 9200') under the sea.[1] Piper oil most likely originated in the Kimmeridge Shale.[5]

See also

[edit]

References

[edit]
  1. ^ a b c d e f g Maher, C.E., Piper Oil Field, in Giant Oil and Gas Fields of the Decade:1968-1978, AAPG Memoir 30, Halbouty, M.T., editor, Tulsa:American Association of Petroleum Geologists, ISBN 0891813063, pp. 131-133
  2. ^ "Talisman Energy information about Piper Bravo" (PDF). Archived from the original (PDF) on 2014-11-25. Retrieved 2013-10-04.
  3. ^ Talisman Energy February 9, 2000 Announcement
  4. ^ pipeline dimensions Archived 2016-12-01 at the Wayback Machine
  5. ^ Maher, C.E., Piper Oil Field, in Giant Oil and Gas Fields of the Decade:1968-1978, AAPG Memoir 30, Halbouty, M.T., editor, Tulsa:American Association of Petroleum Geologists, ISBN 0891813063, p. 159
[edit]