Jump to content

Dijkstra's algorithm

From Wikipedia, the free encyclopedia
(Redirected from Uniform Cost Search)

Dijkstra's algorithm
Dijkstra's algorithm to find the shortest path between a and b. It picks the unvisited vertex with the lowest distance, calculates the distance through it to each unvisited neighbor, and updates the neighbor's distance if smaller. Mark visited (set to red) when done with neighbors.
ClassSearch algorithm
Greedy algorithm
Dynamic programming[1]
Data structureGraph
Usually used with priority queue or heap for optimization[2][3]
Worst-case performance[3]

Dijkstra's algorithm (/ˈdkstrəz/ DYKE-strəz) is an algorithm for finding the shortest paths between nodes in a weighted graph, which may represent, for example, road networks. It was conceived by computer scientist Edsger W. Dijkstra in 1956 and published three years later.[4][5][6]

Dijkstra's algorithm finds the shortest path from a given source node to every other node.[7]: 196–206  It can also be used to find the shortest path to a specific destination node, by terminating the algorithm once the shortest path to the destination node is known. For example, if the nodes of the graph represent cities, and the costs of edges represent the average distances between pairs of cities connected by a direct road, then Dijkstra's algorithm can be used to find the shortest route between one city and all other cities. A common application of shortest path algorithms is network routing protocols, most notably IS-IS (Intermediate System to Intermediate System) and OSPF (Open Shortest Path First). It is also employed as a subroutine in other algorithms such as Johnson's algorithm.

The algorithm uses a min-priority queue data structure for selecting the shortest paths known so far. Before more advanced priority queue structures were discovered, Dijkstra's original algorithm ran in time, where is the number of nodes.[8] The idea of this algorithm is also given in Leyzorek et al. 1957. Fredman & Tarjan 1984 proposed using a Fibonacci heap priority queue to optimize the running time complexity to . This is asymptotically the fastest known single-source shortest-path algorithm for arbitrary directed graphs with unbounded non-negative weights. However, specialized cases (such as bounded/integer weights, directed acyclic graphs etc.) can indeed be improved further, as detailed in Specialized variants. Additionally, if preprocessing is allowed, algorithms such as contraction hierarchies can be up to seven orders of magnitude faster.

Dijkstra's algorithm is commonly used on graphs where the edge weights are positive integers or real numbers. It can be generalized to any graph where the edge weights are partially ordered, provided the subsequent labels (a subsequent label is produced when traversing an edge) are monotonically non-decreasing.[9][10]

In many fields, particularly artificial intelligence, Dijkstra's algorithm or a variant of it is known as uniform cost search and formulated as an instance of the more general idea of best-first search.[11]

History

[edit]

What is the shortest way to travel from Rotterdam to Groningen, in general: from given city to given city. It is the algorithm for the shortest path, which I designed in about twenty minutes. One morning I was shopping in Amsterdam with my young fiancée, and tired, we sat down on the café terrace to drink a cup of coffee and I was just thinking about whether I could do this, and I then designed the algorithm for the shortest path. As I said, it was a twenty-minute invention. In fact, it was published in '59, three years later. The publication is still readable, it is, in fact, quite nice. One of the reasons that it is so nice was that I designed it without pencil and paper. I learned later that one of the advantages of designing without pencil and paper is that you are almost forced to avoid all avoidable complexities. Eventually, that algorithm became to my great amazement, one of the cornerstones of my fame.

— Edsger Dijkstra, in an interview with Philip L. Frana, Communications of the ACM, 2001[5]

Dijkstra thought about the shortest path problem when working at the Mathematical Center in Amsterdam in 1956 as a programmer to demonstrate the capabilities of a new computer called ARMAC.[12] His objective was to choose both a problem and a solution (that would be produced by computer) that non-computing people could understand. He designed the shortest path algorithm and later implemented it for ARMAC for a slightly simplified transportation map of 64 cities in the Netherlands (64, so that 6 bits would be sufficient to encode the city number).[5] A year later, he came across another problem from hardware engineers working on the institute's next computer: minimize the amount of wire needed to connect the pins on the back panel of the machine. As a solution, he re-discovered the algorithm known as Prim's minimal spanning tree algorithm (known earlier to Jarník, and also rediscovered by Prim).[13][14] Dijkstra published the algorithm in 1959, two years after Prim and 29 years after Jarník.[15][16]

Algorithm

[edit]
Illustration of Dijkstra's algorithm finding a path from a start node (lower left, red) to a target node (upper right, green) in a robot motion planning problem. Open nodes represent the "tentative" set (aka set of "unvisited" nodes). Filled nodes are the visited ones, with color representing the distance: the greener, the closer. Nodes in all the different directions are explored uniformly, appearing more-or-less as a circular wavefront as Dijkstra's algorithm uses a heuristic of picking the shortest known path so far.

Let us choose a starting node, and let the distance of node N be the distance from the starting node to N. Dijkstra's algorithm will initially start with infinite distances and will try to improve them step by step.

  1. Mark all nodes as unvisited. Create a set of all the unvisited nodes called the unvisited set.
  2. Assign to every node a distance from start value: for the starting node, it is zero, and for all other nodes, it is infinity, since initially no path is known to these nodes. During execution of the algorithm, the distance of a node N is the length of the shortest path discovered so far between the starting node and N.[17]
  3. From the unvisited set, select the current node to be the one with the smallest finite distance; initially, this will be the starting node, which has distance zero. If the unvisited set is empty, or contains only nodes with infinite distance (which are unreachable), then the algorithm terminates by going to step 6. If we are only concerned about the path to a target node, we may terminate here if the current node is the target node. Otherwise, we can continue to find the shortest paths to all reachable nodes.
  4. For the current node, consider all of its unvisited neighbors and update their distances through the current node; compare the newly calculated distance to the one currently assigned to the neighbor and assign it the smaller one. For example, if the current node A is marked with a distance of 6, and the edge connecting it with its neighbor B has length 2, then the distance to B through A is 6 + 2 = 8. If B was previously marked with a distance greater than 8, then update it to 8 (the path to B through A is shorter). Otherwise, keep its current distance (the path to B through A is not the shortest).
  5. When we are done considering all of the unvisited neighbors of the current node, mark the current node as visited and remove it from the unvisited set. This is so that a visited node is never checked again, which is correct because the distance recorded on the current node is minimal (as ensured in step 3), and thus final. Go back to step 3.
  6. Once the loop exits (steps 3–5), every visited node will contain its shortest distance from the starting node.

Description

[edit]

Suppose you would like to find the shortest path between two intersections on a city map: a starting point and a destination. Dijkstra's algorithm initially marks the distance (from the starting point) to every other intersection on the map with infinity. This is done not to imply that there is an infinite distance, but to note that those intersections have not been visited yet. Some variants of this method leave the intersections' distances unlabeled. Now select the current intersection at each iteration. For the first iteration, the current intersection will be the starting point, and the distance to it (the intersection's label) will be zero. For subsequent iterations (after the first), the current intersection will be a closest unvisited intersection to the starting point (this will be easy to find).

From the current intersection, update the distance to every unvisited intersection that is directly connected to it. This is done by determining the sum of the distance between an unvisited intersection and the value of the current intersection and then relabeling the unvisited intersection with this value (the sum) if it is less than the unvisited intersection's current value. In effect, the intersection is relabeled if the path to it through the current intersection is shorter than the previously known paths. To facilitate shortest path identification, in pencil, mark the road with an arrow pointing to the relabeled intersection if you label/relabel it, and erase all others pointing to it. After you have updated the distances to each neighboring intersection, mark the current intersection as visited and select an unvisited intersection with minimal distance (from the starting point) – or the lowest label—as the current intersection. Intersections marked as visited are labeled with the shortest path from the starting point to it and will not be revisited or returned to.

Continue this process of updating the neighboring intersections with the shortest distances, marking the current intersection as visited, and moving onto a closest unvisited intersection until you have marked the destination as visited. Once you have marked the destination as visited (as is the case with any visited intersection), you have determined the shortest path to it from the starting point and can trace your way back following the arrows in reverse. In the algorithm's implementations, this is usually done (after the algorithm has reached the destination node) by following the nodes' parents from the destination node up to the starting node; that's why we also keep track of each node's parent.

This algorithm makes no attempt of direct "exploration" towards the destination as one might expect. Rather, the sole consideration in determining the next "current" intersection is its distance from the starting point. This algorithm therefore expands outward from the starting point, interactively considering every node that is closer in terms of shortest path distance until it reaches the destination. When understood in this way, it is clear how the algorithm necessarily finds the shortest path. However, it may also reveal one of the algorithm's weaknesses: its relative slowness in some topologies.

Pseudocode

[edit]

In the following pseudocode, dist is an array that contains the current distances from the source to other vertices, i.e. dist[u] is the current distance from the source to the vertex u. The prev array contains pointers to previous-hop nodes on the shortest path from source to the given vertex (equivalently, it is the next-hop on the path from the given vertex to the source). The code u ← vertex in Q with min dist[u], searches for the vertex u in the vertex set Q that has the least dist[u] value. Graph.Edges(u, v) returns the length of the edge joining (i.e. the distance between) the two neighbor-nodes u and v. The variable alt on line 14 is the length of the path from the source node to the neighbor node v if it were to go through u. If this path is shorter than the current shortest path recorded for v, then the distance of v is updated to alt.[7]

A demo of Dijkstra's algorithm based on Euclidean distance. Red lines are the shortest path covering, i.e., connecting u and prev[u]. Blue lines indicate where relaxing happens, i.e., connecting v with a node u in Q, which gives a shorter path from the source to v.
 1  function Dijkstra(Graph, source):
 2     
 3      for each vertex v in Graph.Vertices:
 4          dist[v] ← INFINITY
 5          prev[v] ← UNDEFINED
 6          add v to Q
 7      dist[source] ← 0
 8     
 9      while Q is not empty:
10          u ← vertex in Q with minimum dist[u]
11          remove u from Q
12         
13          for each neighbor v of u still in Q:
14              alt ← dist[u] + Graph.Edges(u, v)
15              if alt < dist[v]:
16                  dist[v] ← alt
17                  prev[v] ← u
18
19      return dist[], prev[]

If we are only interested in a shortest path between vertices source and target, we can terminate the search after line 10 if u = target. Now we can read the shortest path from source to target by reverse iteration:

1  S ← empty sequence
2  utarget
3  if prev[u] is defined or u = source:          // Do something only if the vertex is reachable
4      while u is defined:                       // Construct the shortest path with a stack S
5          insert u at the beginning of S        // Push the vertex onto the stack
6          u ← prev[u]                           // Traverse from target to source

Now sequence S is the list of vertices constituting one of the shortest paths from source to target, or the empty sequence if no path exists.

A more general problem would be to find all the shortest paths between source and target (there might be several different ones of the same length). Then instead of storing only a single node in each entry of prev[] we would store all nodes satisfying the relaxation condition. For example, if both r and source connect to target and both of them lie on different shortest paths through target (because the edge cost is the same in both cases), then we would add both r and source to prev[target]. When the algorithm completes, prev[] data structure will actually describe a graph that is a subset of the original graph with some edges removed. Its key property will be that if the algorithm was run with some starting node, then every path from that node to any other node in the new graph will be the shortest path between those nodes in the original graph, and all paths of that length from the original graph will be present in the new graph. Then to actually find all these shortest paths between two given nodes we would use a path finding algorithm on the new graph, such as depth-first search.

Using a priority queue

[edit]

A min-priority queue is an abstract data type that provides 3 basic operations: add_with_priority(), decrease_priority() and extract_min(). As mentioned earlier, using such a data structure can lead to faster computing times than using a basic queue. Notably, Fibonacci heap[18] or Brodal queue offer optimal implementations for those 3 operations. As the algorithm is slightly different in appearance, it is mentioned here, in pseudocode as well:

1   function Dijkstra(Graph, source):
2       create vertex priority queue Q
3
4       dist[source] ← 0                          // Initialization
5       Q.add_with_priority(source, 0)            // associated priority equals dist[·]
6
7       for each vertex v in Graph.Vertices:
8           if vsource
9               prev[v] ← UNDEFINED               // Predecessor of v
10              dist[v] ← INFINITY                // Unknown distance from source to v
11              Q.add_with_priority(v, INFINITY)
12
13
14      while Q is not empty:                     // The main loop
15          uQ.extract_min()                   // Remove and return best vertex
16          for each neighbor v of u:             // Go through all v neighbors of u
17              alt ← dist[u] + Graph.Edges(u, v)
18              if alt < dist[v]:
19                  prev[v] ← u
20                  dist[v] ← alt
21                  Q.decrease_priority(v, alt)
22
23      return dist, prev

Instead of filling the priority queue with all nodes in the initialization phase, it is also possible to initialize it to contain only source; then, inside the if alt < dist[v] block, the decrease_priority() becomes an add_with_priority() operation if the node is not already in the queue.[7]: 198 

Yet another alternative is to add nodes unconditionally to the priority queue and to instead check after extraction (uQ.extract_min()) that it isn't revisiting, or that no shorter connection was found yet in the if alt < dist[v] block. This can be done by additionally extracting the associated priority p from the queue and only processing further if p == dist[u] inside the while Q is not empty loop.[19]

These alternatives can use entirely array-based priority queues without decrease-key functionality, which have been found to achieve even faster computing times in practice. However, the difference in performance was found to be narrower for denser graphs.[20]

Proof of correctness

[edit]

To prove the correctness of Dijkstra's algorithm, we proceed by mathematical induction on the number of visited nodes.[21]

Invariant hypothesis: For each visited node v, dist[v] is the shortest distance from source to v, and for each unvisited node u, dist[u] is the shortest distance from source to u when traveling via visited nodes only, or infinity if no such path exists. (Note: we do not assume dist[u] is the actual shortest distance for unvisited nodes, while dist[v] is the actual shortest distance)

Base case:

The base case is when there is just one visited node, source. Its distance is defined to be zero, which is the shortest distance, since negative weights are not allowed. Hence, the hypothesis holds.

Inductive step:

Assume the hypothesis holds for visited nodes. We wish to show it holds for nodes. Let u be the next visited node according to the algorithm, i.e. the node with minimum dist[u]. We claim that dist[u] is the shortest distance from source to u.

To prove this claim, we proceed by contradiction. If there were a shorter path, then this shorter path either contains another unvisited node or not.

  • In the former case, let w be the first unvisited node on this shorter path. By the induction hypothesis, the shortest paths from source to u and w through visited nodes only have costs dist[u] and dist[w] respectively. This means the cost of going from source to u via w has the cost of at least dist[w] + the minimal cost of going from w to u. As the edge costs are positive, the minimal cost of going from w to u is a positive number. However, dist[u] is at most dist[w] because otherwise w would have been picked by the priority queue instead of v. This is a contradiction, since it has already been established that dist[w] + a positive number < dist[u].
  • In the latter case, let w be the last but one node on the shortest path. That means dist[w] + Graph.Edges[w,u] < dist[u]. That is a contradiction because by the time w is visited, it should have set dist[u] to at most dist[w] + Graph.Edges[w,u].

For all other visited nodes v, the dist[v] is already known to be the shortest distance from source already, because of the inductive hypothesis, and these values are unchanged.

After processing u, it will still be true that for each unvisited node w, dist[w] will be the shortest distance from source to w using visited nodes only. If there were a shorter path that did not use u, we would have found it previously, and if there were a shorter path using u we would have updated it when processing u.

After all nodes are visited, the shortest path from source to any node v consists only of visited nodes. Therefore, dist[v] is the shortest distance.

Running time

[edit]

Bounds of the running time of Dijkstra's algorithm on a graph with edges E and vertices V can be expressed as a function of the number of edges, denoted , and the number of vertices, denoted , using big-O notation. The complexity bound depends mainly on the data structure used to represent the set Q. In the following, upper bounds can be simplified because is for any simple graph, but that simplification disregards the fact that in some problems, other upper bounds on may hold.

For any data structure for the vertex set Q, the running time is in[2]

where and are the complexities of the decrease-key and extract-minimum operations in Q, respectively.

The simplest version of Dijkstra's algorithm stores the vertex set Q as a linked list or array, and edges as an adjacency list or matrix. In this case, extract-minimum is simply a linear search through all vertices in Q, so the running time is .

For sparse graphs, that is, graphs with far fewer than edges, Dijkstra's algorithm can be implemented more efficiently by storing the graph in the form of adjacency lists and using a self-balancing binary search tree, binary heap, pairing heap, or Fibonacci heap as a priority queue to implement extracting minimum efficiently. To perform decrease-key steps in a binary heap efficiently, it is necessary to use an auxiliary data structure that maps each vertex to its position in the heap, and to keep this structure up to date as the priority queue Q changes. With a self-balancing binary search tree or binary heap, the algorithm requires

time in the worst case; for connected graphs this time bound can be simplified to . The Fibonacci heap improves this to

When using binary heaps, the average case time complexity is lower than the worst-case: assuming edge costs are drawn independently from a common probability distribution, the expected number of decrease-key operations is bounded by , giving a total running time of[7]: 199–200 

Practical optimizations and infinite graphs

[edit]

In common presentations of Dijkstra's algorithm, initially all nodes are entered into the priority queue. This is, however, not necessary: the algorithm can start with a priority queue that contains only one item, and insert new items as they are discovered (instead of doing a decrease-key, check whether the key is in the queue; if it is, decrease its key, otherwise insert it).[7]: 198  This variant has the same worst-case bounds as the common variant, but maintains a smaller priority queue in practice, speeding up the queue operations.[11]

Moreover, not inserting all nodes in a graph makes it possible to extend the algorithm to find the shortest path from a single source to the closest of a set of target nodes on infinite graphs or those too large to represent in memory. The resulting algorithm is called uniform-cost search (UCS) in the artificial intelligence literature[11][22][23] and can be expressed in pseudocode as

procedure uniform_cost_search(start) is
    node ← start
    frontier ← priority queue containing node only
    expanded ← empty set
    do
        if frontier is empty then
            return failure
        node ← frontier.pop()
        if node is a goal state then
            return solution(node)
        expanded.add(node)
        for each of node's neighbors n do
            if n is not in expanded and not in frontier then
                frontier.add(n)
            else if n is in frontier with higher cost
                replace existing node with n

The complexity of this algorithm can be expressed in an alternative way for very large graphs: when C* is the length of the shortest path from the start node to any node satisfying the "goal" predicate, each edge has cost at least ε, and the number of neighbors per node is bounded by b, then the algorithm's worst-case time and space complexity are both in O(b1+⌊C* ε).[22]

Further optimizations of Dijkstra's algorithm for the single-target case include bidirectional variants, goal-directed variants such as the A* algorithm (see § Related problems and algorithms), graph pruning to determine which nodes are likely to form the middle segment of shortest paths (reach-based routing), and hierarchical decompositions of the input graph that reduce st routing to connecting s and t to their respective "transit nodes" followed by shortest-path computation between these transit nodes using a "highway".[24] Combinations of such techniques may be needed for optimal practical performance on specific problems.[25]

Specialized variants

[edit]

When arc weights are small integers (bounded by a parameter ), specialized queues which take advantage of this fact can be used to speed up Dijkstra's algorithm. The first algorithm of this type was Dial's algorithm (Dial 1969) for graphs with positive integer edge weights, which uses a bucket queue to obtain a running time . The use of a Van Emde Boas tree as the priority queue brings the complexity to (Ahuja et al. 1990). Another interesting variant based on a combination of a new radix heap and the well-known Fibonacci heap runs in time (Ahuja et al. 1990). Finally, the best algorithms in this special case are as follows. The algorithm given by (Thorup 2000) runs in time and the algorithm given by (Raman 1997) runs in time.

[edit]

The functionality of Dijkstra's original algorithm can be extended with a variety of modifications. For example, sometimes it is desirable to present solutions which are less than mathematically optimal. To obtain a ranked list of less-than-optimal solutions, the optimal solution is first calculated. A single edge appearing in the optimal solution is removed from the graph, and the optimum solution to this new graph is calculated. Each edge of the original solution is suppressed in turn and a new shortest-path calculated. The secondary solutions are then ranked and presented after the first optimal solution.

Dijkstra's algorithm is usually the working principle behind link-state routing protocols, OSPF and IS-IS being the most common ones.

Unlike Dijkstra's algorithm, the Bellman–Ford algorithm can be used on graphs with negative edge weights, as long as the graph contains no negative cycle reachable from the source vertex s. The presence of such cycles means there is no shortest path, since the total weight becomes lower each time the cycle is traversed. (This statement assumes that a "path" is allowed to repeat vertices. In graph theory that is normally not allowed. In theoretical computer science it often is allowed.) It is possible to adapt Dijkstra's algorithm to handle negative weight edges by combining it with the Bellman-Ford algorithm (to remove negative edges and detect negative cycles); such an algorithm is called Johnson's algorithm.

The A* algorithm is a generalization of Dijkstra's algorithm that cuts down on the size of the subgraph that must be explored, if additional information is available that provides a lower bound on the "distance" to the target.

The process that underlies Dijkstra's algorithm is similar to the greedy process used in Prim's algorithm. Prim's purpose is to find a minimum spanning tree that connects all nodes in the graph; Dijkstra is concerned with only two nodes. Prim's does not evaluate the total weight of the path from the starting node, only the individual edges.

Breadth-first search can be viewed as a special-case of Dijkstra's algorithm on unweighted graphs, where the priority queue degenerates into a FIFO queue.

The fast marching method can be viewed as a continuous version of Dijkstra's algorithm which computes the geodesic distance on a triangle mesh.

Dynamic programming perspective

[edit]

From a dynamic programming point of view, Dijkstra's algorithm is a successive approximation scheme that solves the dynamic programming functional equation for the shortest path problem by the Reaching method.[26][27][28]

In fact, Dijkstra's explanation of the logic behind the algorithm,[29] namely

Problem 2. Find the path of minimum total length between two given nodes and .

We use the fact that, if is a node on the minimal path from to , knowledge of the latter implies the knowledge of the minimal path from to .

is a paraphrasing of Bellman's Principle of Optimality in the context of the shortest path problem.

See also

[edit]

Notes

[edit]
  1. ^ Controversial, see Moshe Sniedovich (2006). "Dijkstra's algorithm revisited: the dynamic programming connexion". Control and Cybernetics. 35: 599–620. and below part.
  2. ^ a b Cormen et al. 2001
  3. ^ a b Fredman & Tarjan 1987
  4. ^ Richards, Hamilton. "Edsger Wybe Dijkstra". A.M. Turing Award. Association for Computing Machinery. Retrieved 16 October 2017. At the Mathematical Centre a major project was building the ARMAC computer. For its official inauguration in 1956, Dijkstra devised a program to solve a problem interesting to a nontechnical audience: Given a network of roads connecting cities, what is the shortest route between two designated cities?
  5. ^ a b c Frana, Phil (August 2010). "An Interview with Edsger W. Dijkstra". Communications of the ACM. 53 (8): 41–47. doi:10.1145/1787234.1787249. S2CID 27009702.
  6. ^ Dijkstra, E. W. (1959). "A note on two problems in connexion with graphs". Numerische Mathematik. 1: 269–271. CiteSeerX 10.1.1.165.7577. doi:10.1007/BF01386390. S2CID 123284777.
  7. ^ a b c d e Mehlhorn, Kurt; Sanders, Peter (2008). "Chapter 10. Shortest Paths" (PDF). Algorithms and Data Structures: The Basic Toolbox. Springer. doi:10.1007/978-3-540-77978-0. ISBN 978-3-540-77977-3.
  8. ^ Schrijver, Alexander (2012). "On the history of the shortest path problem" (PDF). Documenta Mathematica. Documenta Mathematica Series: 155–167. doi:10.4171/dms/6/19. ISBN 978-3-936609-58-5.
  9. ^ Szcześniak, Ireneusz; Jajszczyk, Andrzej; Woźna-Szcześniak, Bożena (2019). "Generic Dijkstra for optical networks". Journal of Optical Communications and Networking. 11 (11): 568–577. arXiv:1810.04481. doi:10.1364/JOCN.11.000568. S2CID 52958911.
  10. ^ Szcześniak, Ireneusz; Woźna-Szcześniak, Bożena (2023), "Generic Dijkstra: Correctness and tractability", NOMS 2023-2023 IEEE/IFIP Network Operations and Management Symposium, pp. 1–7, arXiv:2204.13547, doi:10.1109/NOMS56928.2023.10154322, ISBN 978-1-6654-7716-1, S2CID 248427020
  11. ^ a b c Felner, Ariel (2011). Position Paper: Dijkstra's Algorithm versus Uniform Cost Search or a Case Against Dijkstra's Algorithm. Proc. 4th Int'l Symp. on Combinatorial Search. Archived from the original on 18 February 2020. Retrieved 12 February 2015. In a route-finding problem, Felner finds that the queue can be a factor 500–600 smaller, taking some 40% of the running time.
  12. ^ "ARMAC". Unsung Heroes in Dutch Computing History. 2007. Archived from the original on 13 November 2013.
  13. ^ Dijkstra, Edsger W., Reflections on "A note on two problems in connexion with graphs (PDF)
  14. ^ Tarjan, Robert Endre (1983), Data Structures and Network Algorithms, CBMS_NSF Regional Conference Series in Applied Mathematics, vol. 44, Society for Industrial and Applied Mathematics, p. 75, The third classical minimum spanning tree algorithm was discovered by Jarník and rediscovered by Prim and Dikstra; it is commonly known as Prim's algorithm.
  15. ^ Prim, R.C. (1957). "Shortest connection networks and some generalizations" (PDF). Bell System Technical Journal. 36 (6): 1389–1401. Bibcode:1957BSTJ...36.1389P. doi:10.1002/j.1538-7305.1957.tb01515.x. Archived from the original (PDF) on 18 July 2017. Retrieved 18 July 2017.
  16. ^ V. Jarník: O jistém problému minimálním [About a certain minimal problem], Práce Moravské Přírodovědecké Společnosti, 6, 1930, pp. 57–63. (in Czech)
  17. ^ Gass, Saul; Fu, Michael (2013). "Dijkstra's Algorithm". In Gass, Saul I; Fu, Michael C (eds.). Encyclopedia of Operations Research and Management Science. Vol. 1. Springer. doi:10.1007/978-1-4419-1153-7. ISBN 978-1-4419-1137-7 – via Springer Link.
  18. ^ Fredman & Tarjan 1984.
  19. ^ Observe that p < dist[u] cannot ever hold because of the update dist[v] ← alt when updating the queue. See https://cs.stackexchange.com/questions/118388/dijkstra-without-decrease-key for discussion.
  20. ^ Chen, M.; Chowdhury, R. A.; Ramachandran, V.; Roche, D. L.; Tong, L. (2007). Priority Queues and Dijkstra's Algorithm – UTCS Technical Report TR-07-54 – 12 October 2007 (PDF). Austin, Texas: The University of Texas at Austin, Department of Computer Sciences.
  21. ^ Cormen, Thomas H.; Leiserson, Charles E.; Rivest, Ronald L.; Stein, Clifford (2022) [1990]. "22". Introduction to Algorithms (4th ed.). MIT Press and McGraw-Hill. pp. 622–623. ISBN 0-262-04630-X.
  22. ^ a b Russell, Stuart; Norvig, Peter (2009) [1995]. Artificial Intelligence: A Modern Approach (3rd ed.). Prentice Hall. pp. 75, 81. ISBN 978-0-13-604259-4.
  23. ^ Sometimes also least-cost-first search: Nau, Dana S. (1983). "Expert computer systems" (PDF). Computer. 16 (2). IEEE: 63–85. doi:10.1109/mc.1983.1654302. S2CID 7301753.
  24. ^ Wagner, Dorothea; Willhalm, Thomas (2007). Speed-up techniques for shortest-path computations. STACS. pp. 23–36.
  25. ^ Bauer, Reinhard; Delling, Daniel; Sanders, Peter; Schieferdecker, Dennis; Schultes, Dominik; Wagner, Dorothea (2010). "Combining hierarchical and goal-directed speed-up techniques for Dijkstra's algorithm". J. Experimental Algorithmics. 15: 2.1. doi:10.1145/1671970.1671976. S2CID 1661292.
  26. ^ Sniedovich, M. (2006). "Dijkstra's algorithm revisited: the dynamic programming connexion" (PDF). Journal of Control and Cybernetics. 35 (3): 599–620. Online version of the paper with interactive computational modules.
  27. ^ Denardo, E.V. (2003). Dynamic Programming: Models and Applications. Mineola, NY: Dover Publications. ISBN 978-0-486-42810-9.
  28. ^ Sniedovich, M. (2010). Dynamic Programming: Foundations and Principles. Francis & Taylor. ISBN 978-0-8247-4099-3.
  29. ^ Dijkstra 1959, p. 270

References

[edit]
[edit]