Jump to content

File:Rotary spark gap transmitter.jpg

Page contents not supported in other languages.
This is a file from the Wikimedia Commons
From Wikipedia, the free encyclopedia

Rotary_spark_gap_transmitter.jpg (700 × 450 pixels, file size: 135 KB, MIME type: image/jpeg)

Summary

Description
English: A small spark gap radio transmitter, an obsolete type of radio transmitter used during the wireless telegraphy era. from 1900 to the early 1920s. This was a small transmitter made for hobbyists, claimed to be 95% efficient. It consists of a transformer (left) which steps the 120V power line voltage up to 25,000 V. a capacitor (black rectangle, center) consisting of parallel metal plates separated by phenolic cloth, immersed in a container of insulating oil to prevent corona discharge losses, an air core RF inductor consisting of two spiral strips of metal (background, right), and a rotary spark gap consisting of a toothed metal wheel (right foreground) driven by a motor, which rotates next to a stationary electrode. The two cylinders on the lines coming from the top of the transformer (right) were chokes to prevent the RF current from the tuned circuit from getting into the transformer.

In operation, the transformer charged the capacitor to a high voltage. When an electrode on the spark wheel passed a stationary electrode, a spark would jump, completing the circuit between the capacitor and coil, making a resonant circuit. The charge on the capacitor flowed rapidly back and forth between the capacitor plates, through the coil and spark gap, creating a radio frequency oscillating current. The two spiral coils formed an air-core transformer. The oscillating current from the capacitor passed through the near coil (the primary), inducing a higher oscillating voltage in the far coil (the secondary). The ends of the secondary coil were attached to the transmitting antenna, a long wire suspended in the air, and a ground connection. When the antenna was excited by this oscillating voltage, it radiated radio waves. Each time an electrode on the rotating spark wheel passed the stationary electrode, the spark would generate a brief burst of radio waves. These damped waves repeated at an audio rate, from several hundred to a thousand sparks a second, so the radio signal sounded like a buzz or whine in a radio receiver. A telegraph key was used to turn the transmitter off and on, to spell out text messages in Morse code.
Date
Source Downloaded from "Efficient Amateur Radio Transmitter" in Hugo Gernsback, Ed. Radio Amateur News" (Experimenter Publishing Co., New York), October 1919, p. 181 on Google Books
Author Unknown authorUnknown author

Licensing

Public domain
Public domain
This media file is in the public domain in the United States. This applies to U.S. works where the copyright has expired, often because its first publication occurred prior to January 1, 1929, and if not then due to lack of notice or renewal. See this page for further explanation.

United States
United States
This image might not be in the public domain outside of the United States; this especially applies in the countries and areas that do not apply the rule of the shorter term for US works, such as Canada, Mainland China (not Hong Kong or Macao), Germany, Mexico, and Switzerland. The creator and year of publication are essential information and must be provided. See Wikipedia:Public domain and Wikipedia:Copyrights for more details.

Captions

Rotary spark gap radio transmitter

Items portrayed in this file

depicts

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current14:08, 3 May 2021Thumbnail for version as of 14:08, 3 May 2021700 × 450 (135 KB)Materialscientistfft
10:44, 29 August 2013Thumbnail for version as of 10:44, 29 August 2013700 × 450 (80 KB)ChetvornoUser created page with UploadWizard

The following page uses this file: