Jump to content

File:BWR Mark I Containment sketch with downcomers.svg

Page contents not supported in other languages.
This is a file from the Wikimedia Commons
From Wikipedia, the free encyclopedia

Original file (SVG file, nominally 1,600 × 1,200 pixels, file size: 79 KB)

Summary

Description
English: Rough sketch of a typical Boiling water reactor (BWR) Mark I Concrete Containment with Steel Torus including downcomers, as used in the BWR/1, BWR/2, BWR/3 and some BWR/4 model reactors.
   * DW = Drywell
   * WW = Wetwell
   * SFP = Spent Fuel Pool
   * RPV = Reactor Pressure Vessel
   * SCSW = Secondary Concrete Shield Wall

Français : Diagramme/coupe d'un réacteur à eau bouillante (REB) typique de type Mark I à enceinte de confinement en béton avec tore d'acier sous-jacent, tel qu'utilisé dans les réacteurs de type REB/1, REB/2, REB/3 et certains REB/4. Español: Diagrama/corte esquemático de un reactor de agua en ebullición tipico del tipo Mark I con recinto de contención en hormigón con toro subyacente en acero, como los utilizados en los reactores de tipo BWR/1, BWR/2, BWR/3 y algunos BWR/4. Català: Esquema d'un reactor d'aigua en ebullició (BWR, Boiling water reactor) de tipus Mark I amb contenció de formigó i torus d'acer incloent baixants, com els utilitzats en els models de reactor BWR/1, BWR/2, BWR/3 i alguns BWR/4.

   * DW = Pou sec
   * WW = Pou moll
   * SFP = Piscina del combustible gastat
   * RPV = Vas a pressió del reactor
* SCSW = Paret secundària amb blindatge de formigó
Date png:16 March 2011; svg: 2011-04-07
Source

File:BWR Mark I Containment sketch with downcomers.png; source:

Sketched in Paint.net using 826 x 852 canvas inspired by Page 15 (pdf: 40), Containment Integrity Research at Sandia National Laboratories - An Overview, Manuscript completed: March 2006, Published: July 2006, id: NUREG/CR-6906 and SAND2006-2274P [1] - Prepared by Sandia National Laboratories for the U.S. Nuclear Regulatory Commission, Job Code Y6757. The two diagrams on the same page are labeled: Figure 5 Typical BWR Mark I Concrete Containment with Steel Torus.
Author PNG:User:84user; SVG:User:RicHard-59
Permission
(Reusing this file)
Public domain This work has been released into the public domain by its author, RicHard-59. This applies worldwide.
In some countries this may not be legally possible; if so:
RicHard-59 grants anyone the right to use this work for any purpose, without any conditions, unless such conditions are required by law.
Other versions File:BWR Mark I Containment sketch with downcomers.png

Licensing

I, the copyright holder of this work, hereby publish it under the following license:
Creative Commons CC-Zero This file is made available under the Creative Commons CC0 1.0 Universal Public Domain Dedication.
The person who associated a work with this deed has dedicated the work to the public domain by waiving all of their rights to the work worldwide under copyright law, including all related and neighboring rights, to the extent allowed by law. You can copy, modify, distribute and perform the work, even for commercial purposes, all without asking permission.

Captions

Add a one-line explanation of what this file represents

Items portrayed in this file

depicts

image/svg+xml

68fefa09c90299e25439e7c83504d5a25cfce9bc

80,781 byte

1,200 pixel

1,600 pixel

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current20:48, 7 April 2011Thumbnail for version as of 20:48, 7 April 20111,600 × 1,200 (79 KB)RicHard-59{{Information |Description ={{en|1=Rough sketch of a typical Boiling water reactor (BWR) Mark I Concrete Containment with Steel Torus including downcomers, as used in the BWR/1, BWR/2, BWR/3 and some BWR/4 model reactors. * DW = Drywell * WW =

The following page uses this file:

Global file usage

The following other wikis use this file: